Welcome to the First Column IT Tech Blog

HomeBlog
Tip of the Week: Improve Your Network Through Router Placement

Tip of the Week: Improve Your Network Through Router Placement

September 15, 2025

A solid Wi-Fi connection is a necessity, not a luxury. To provide your team with the best possible wireless connection, you need to choose the right router and place it correctly. It's best for a business to buy its own modem and router, rather than renting a combined device from an internet provider. This gives you full control over your network and allows you to select hardware that fits your specific needs.

Choosing the Right Router

When you're shopping for a router, look for key features. Security is important, so make sure it has robust WPA3 encryption and a strong firewall. The router should support multiple bands—dual-band (2.4 GHz and 5.0 GHz) at a minimum, and ideally tri-band (with 6.0 GHz) to connect various devices. You'll want at least three LAN ports and one WAN port. 

A built-in VPN option adds an extra layer of protection, and to ensure you get the fastest speeds, choose a router that supports a modern protocol like 802.11ac or newer standards like Wi-Fi 6 or 6E. Finally, make sure it has Gigabit ports for the fastest possible wired connections.

Contact us at (571) 470-5594 if you need any help!

Optimizing Router Placement

Once you have the right router, its placement is crucial for a strong signal. To get the most speed and coverage, install the router in a central location in your office so the signal can reach everyone.

It's also important to keep it raised off the floor to prevent physical obstructions from weakening the signal. Try to keep it away from other electronics that can cause interference. Before you install all your other office technology, map out the signal strength and consider using wireless extenders to cover any dead zones.

If you need help finding the best networking technology, feel free to contact us at (571) 470-5594.

‍

Previous Post
June 26, 2023
No Matter How Unlikely, You Should Be Prepared for Total System Failures with a BDR
The more complex and robust your IT infrastructure is, the greater the chances that it will undergo a system failure. Basically, according to Murphy’s Law, if something can go wrong, you should expect it to go wrong. To counteract this mentality with real, tangible methods that you can control, you’ll want to implement solutions that prioritize redundancy. This week’s blog is all about how you can build redundancy into your infrastructure through the use of data backup and restoration systems.
June 23, 2023
Want to Improve Security? Start with These Basic Concerns
There are some security issues that businesses are much more likely to experience than others, including the following. Let’s go over how you can protect your organization from these challenges and why it is so important that you take precautions now, before it’s too late.
June 21, 2023
No Surprise, AI Is Advancing Very Quickly
Artificial Intelligence (AI) is one of those monikers that we’ve extended to most machine learning technologies nowadays. Over the past few years, however, AI has made huge strides in industry, providing a level of automation that simply wasn’t possible previously. Couple in the massive benefits that organizations can see through AI-driven data insights and it is truly a transformative technology. This week, we’ll take a look at AI and unpack just how fast it is evolving. 

Have a project in mind?

Start with our free consultation. We will provide a detailed proposal and firm quote based on your specific IT support needs. All at a predictable monthly cost per seat.
Free Consultation - Sign Up Here